Cup Wrap Instructions
1. Squeegee wrap front and back before use.
2. Trim down wrap to remove excess material to your preference.
3. Make sure glass/plastic is clean from any hand oils.(DO NOT use alcohol to clean, our wraps are not alcohol friendly.)
4. Peel design film transfer off.
5. Line the design film on the glass/plastic cup and lay design film down.(The adhesive is extremely strong. Once the film touches the surface it’s impossible to take off.)
6. Squeegee the film down, working from the center outwards, pushing out any bubbles.
7. Rub, Rub, Rub. The more rubbing the better.
8. Carefully and slowly peel clear film off and done!